Daikin Mxs Wall Mounted 2-zone System - 24,000 Btu Outdoor - 9k + 18k Indoor - 18.9 Seer Review Jul 20, 2016

I have one of these and am a bit disappointed when it's efficiency drastically decreases when the outside temperature drops below -10C or + 24F. Still I am very pleased with it. Now the inside unit 'chirps', what is up with that ? Does it need to be oiled ? Doug

Modine Noisy Mar 10, 2016

After waiting 26 days to get my Effinity 93 110000 btu unit, I installed it only to find out the propeller fan was very noisy. It is louder than my air compressor. Modine will not honor the warranty unless you use a professional installer. If you are a do it yourselfer, don't buy this unit. The propeller motor is cheap and creates a lot of vibration noise. Even if the motor was replaced under warranty, it would still be the same noisy motor. If you want to be able to talk in the vicinity... more

Nice Choice Jan 10, 2016

The radiators went together very easily with the connections provided to the heating pex and there were no leaks. very easy to bleed. they provide much more heat than I was getting from my old wall convectors and seem to retain the heat a long time after the boiler is off. Not hard to hang either as long as you separate the hanger prongs in increments of 1/2 inch. Also, my wife was pleasantly surprised by the appearance

Perfection Nov 03, 2016

We replaced an old 12 SEER 4 ton with this 3 ton 14/15 SEER. The client's power bill has dropped by about $40 / month, and cannot be happier. Most homes have oversize AC systems - do your Manual-J and trust the math. Shipping was flawless. 4 business days from IL to AZ, and the carrier let me pick up direct at the freight yard so that delivery took place on my schedule, rather than during a delivery window. Buying same-day shipping for $50 was worth every penny. From now on, eComfort is my... more

Not Good. Oct 23, 2016

To begin, I regret buying this daily. It replaced a 10+ yr old Fujitsu that outperformed it in every way. First issue I had was the directional blade motor failing. Ecomfort sent a new part, it's now working. Second issue has to do with the appearance, the seams to not align, many of the gaps between plastic parts are uneven. It appears to be caused by how thin the plastic is, it borders on paper, it really does not have enough integrity to support it's own weight. Even if you are going... more