Nice Choice Oct 03, 2016

The radiators went together very easily with the connections provided to the heating pex and there were no leaks. very easy to bleed. they provide much more heat than I was getting from my old wall convectors and seem to retain the heat a long time after the boiler is off. Not hard to hang either as long as you separate the hanger prongs in increments of 1/2 inch. Also, my wife was pleasantly surprised by the appearance

Use Vibration Dampening Nov 04, 2016

I finally got this installed and working. I like the copper heat exchanger and the compact size. I mounted the first one to concrete walls to avoid vibration above. It took some adjusting to get the louvers to stop vibrating and making noise. It looks like a slick little heater and I expect it will last longer than me. The only down side is the vibration from the fan. I'll have to cut the pipe and put in some vibration dampening. It carries the vibration through the pipes into the hangers... more

Excellent Sep 20, 2016

Works amazing..extremely quiet. Would recommend it.

Best Inventment Ever! Aug 05, 2016

Our main house is cooled by a 2.5 ton conventional a/c. I replaced that unit in June with a new American Standard (Trane) a/c. On the back of the house is a Florida room 44' x 12' that was not air conditioned. Three sides of the room are sliding glass doors, circa 1989, overlooking a lake and facing east. The summer sun and Florida temperatures made the Florida room un-usable during the daylight hours. A load evaluation recommended a 3 ton unit to cool the Florida room. After much... more

Love Is Fantech May 10, 2016

I used this inline fan to hook up to my vent hood in my kitchen. Even though this product was assembled in America, the motor was made in Germany and you certainly can't go wrong with German technology. I also brought LD10 silencer to attach directly to the fan and placed the silencer between the vent hood and the fan. I also purchased the FC10 clamp to hold the silencer and fan in place. I find the clamp itself was not good enough to hold fan and the silencer. To give me a piece of mind,... more