Warmwire Heated Floor Jun 03, 2016

I installed a WarmWire heated floor in a 6'x8' coat room that had no other source of heat. It is on a concrete slab with 2 outside walls and a wall to an unheated attached garage. I glued 2 6mm thick sheets of Cerazorb synthetic cork directly on the concrete. It was super easy to lay the wire on top on the cork using the metal clip system provided. To be safe, I laid a sheet of 1/4" luan plywood on top of the wires while laying the tile. I checked the resistance in the wires at each step... more

Works Great! Jan 29, 2016

I would suggest comparing the 3 choices of boilers recommended. I just bought the top rated and didn't realize it didn't come with the pump as pictured. I probably would have taken the most popular second choice. Also, the relief valve was no good on my boiler so I had to purchase a new one. Otherwise it works great and was easy to install.

Owner, Custom Made Aug 25, 2016

I replaced a Dunkirk XEB-3 (20 yrs. old) with the Dunkirk boiler above. The new one is all most identical to the old one, that is the pipes were located same as the old, so gas and water lines were easily plumbed. The old electrical wires could be used although lengthened to connect to the digital controls. The circulators location has changed, it's still provided with its wiring provided. Venting is the same as the old one. I was happy to get another Dunkirk that installed easily.

Good Quality Jul 12, 2016

Easy installation, works great, no problems at all.

Well Made Heater Nov 04, 2016

This heater was easy to install, it is made of high quality metal. Nice to have power connections on both sides of the heater and ample amount of heat.